KD® Disc Couplings
KD® Series of flexible shaft couplings provides reliable transmission of mechanical power from driving to driven machine where a low-maintenance, non-lubricated coupling is required.
KD Disc Couplings are specifically designed to accommodate general purpose drive system applications such as centrifugal pumps, compressors, generators, cooling towers, machine tools, printing and pulp and paper machines.
Nội dung chi tiết
CLOSE COUPLED
KD1 with MT Disc Packs
Size Range 103 to 453
Bore Range .50 – 5.50”
Overview
- Unitized Disc Pack replaced without moving connected machines
- Medium Duty Applications
KD10 with HS Disc Packs
Size Range 103 to 905
Bore Range .50 – 11.50”
Overview
- Unitized Disc Pack replaced without moving connected machines
- Heavy Duty Applications
- Ratings Similar to Gear Couplings
KD11 with HT Disc Packs
Size Range 103 to 905
Bore Range .50 – 11.50”
Overview
- Unitized Disc Pack
- Heavy Duty Applications
- Ratings Similar to Gear Couplings
SPACER STYLES
KD2® with MT Disc Packs
Size Range 103 to 453
Bore Range .50 – 7.25”
Overview
- “Drop-Out” Spacer Design
- Factory Assembled Center Flex Section
- Medium Duty Applications
KD20 with HT Disc Packs
Size Range 204 to 905
Bore Range 1.00 – 13.50”
Overview
- “Drop-Out” Spacer Design
- Factory Assembled Center Flex Section
- High Torque Applications
KD21 with HT Disc Packs
Size Range 053 to 905
Bore Range .50 – 13.50”
Overview
- Simple 3 Piece Spacer Design
- Unitized “Drop-Out” Disc Pack
- High Torque Applications
COOLING TOWER
KD33 with CT Disc Packs
Size Range 153 to 303
Bore Range .50 – 4.50”
Overview
- Cooling Towers with Very Long Shaft Separation
- Stainless Steel/Composite Tubes
- Replaces most competitive Cooling Tower
- Couplings
- Non-lubricated
SINGLE FLEX & FLOATING SHAFTS
KD4 with HT Disc Packs
Size Range 103 to 905
Bore Range .50 – 13.50”
Overview
- Single Flex
- Unitized “Drop-Out” Disc Pack
- Heavy Duty Applications
KD41 with HT Disc Packs
Size Range 103 to 905
Bore Range .50 – 13.50”
Overview
- Floating Shaft Design
- Unitized “Drop-Out” Disc Pack
- Heavy Duty Applications
KD42 with HT Disc Packs
Size Range 103 to 905
Bore Range .50 – 11.50” Flex Half
Overview
- Floating Shaft Design
- Bolts Directly to Gear Coupling Rigids
- Unitized Disc Pack
- Heavy Duty Applications
- Ratings Similar to Gear Couplings
KD® Series of flexible shaft couplings provides reliable transmission of mechanical power from driving to driven machine where a low-maintenance, non-lubricated coupling is required.
KD Disc Couplings are specifically designed to accommodate general purpose drive system applications such as centrifugal pumps, compressors, generators, cooling towers, machine tools, printing and pulp and paper machines.
KD Couplings transmit torque and provide for both angular and axial misalignment between shafts with a coupling comprised of shaft mounted hubs connected through flexible disc packs with spacer or sleeve assemblies.
All KD Couplings use stainless steel discs as flexible members, providing high strength and good corrosion resistance. The streamline disk pack design results in the reaction load on equipment bearings being minimized. These disc pack couplings are inherently self-centering; additional provision for limited end float is not required.
Most disc packs are unitized and, along with self-locking nuts, they greatly reduce the number of loose parts, thus simplifying installation and replacement.
KD Disc Couplings are now available in an expanded range of sizes and styles suitable for common installations. Or if you need something special, we can design a coupling to meet your specific requirements.
Sản phẩm liên quan
GEAR UNIT FOR AERATOR
SINGLE SCREW – MANY OUTPUT
PLANETARY GEAR
HELICAL GEAR UNITS AND BEVEL-HELICAL GEAR
Elastomeric Couplings
